Why we choose flooring with Click system?

When we buy (KELAI Wood)floor,We usually do not prefer to install floor by glue and are more concern on the environmental issues. so the shopping guide usually recommend us the click system flooring.

So what exactly is click System floor(KELAI Wood)? What's its advantage?

The click fitting system means that the planks of flooring(KELAI Wood) easily click together and lock into place, eliminating the need for nails.

Compared with the traditional floor(KELAI Wood), the click floor completely overcomes the problems, such as the gap, warping and uplift etc, and also save the room space!The click floor(KELAI Wood), which began to be widely used, had the following advantages(KELAI Wood):

01

More stringent requirements on layer(KELAI Wood)

The tight locking force of the click floor(KELAI Wood) is mainly determined by the connection of the tongue and groove. Due to the function of the inverted tenon, under normal circumstances, the click floor (KELAI Wood)can bear the pulling force of 450 kg to 1 ton. Therefore, the click floor has higher requirements on the density, degree of expansion and relative humidity of the substrate, production equipment, processing technology and so on

02
Overall paving effect is better(KELAI Wood)

In the production process, the click floor (KELAI Wood)adopts the advanced laser check quality detection system, that is, the laser automatic correction, avoids the height difference, makes the tongue and groove more fine and smooth.

The click flooring (KELAI Wood)use the industrial standard instead of manual paving standard to reduce the error of manual paving. When paving, the click flooring(KELAI Wood) can be gently tapped into the trough. By the tight locking force of the click floor, with the temperature changes to the overall extension around can well avoid local uplift, solve the internal deformation, the overall paving effect would more better.

03

Non-adhesive paving(KELAI Wood)

The common wooden floor(KELAI Wood) in the process of paving need adhesive to connection, while adhesive usually contains formaldehyde and other chemical components. Therefore the problem will arise: with more it will easy to cause indoor pollution, with less people will afraid of connection is unstable. Because of the tight locking force of the click floor(KELAI Wood), it can not only avoid using glue to install, the joint is also very tight, but also will keep from of rising or cracking when temperature changes.

04

Reusable(KELAI Wood)

The Click floor (KELAI Wood)is easy to install as well as it`s easy to disassemble and can be reused. It is especially suitable for temporary places such as exhibitions and stores. If the moving, the floor(KELAI Wood) can be used again, take leave without delay!

05

Economical and practical

Although click floor(KELAI Wood) has much more advantages, the price general relatively expensive, relatively more expensive point, while the installation costs will be cheaper.

06

Suitable for public places and sports areas

Click flooring(KELAI Wood) with the tight locking force, would more suitable for public places and stadiums.

Why is the click flooring(KELAI Wood) still need use glue?

The main purpose of using glue during the installation is in order to prevent moisture. The glue can be sealed joints, play a preventive role will be more secure.

The click mechanism is specially designed to leave space let the glue flowing and solidifying cavity in the floor, which can lock the floor exactly in the designed position, reduce the possibility of the joint becoming bigger and the edge becoming warped, and improve the service life of the floor(KELAI Wood).